一种新的岩石非线性黏弹塑性蠕变模型研究

为了克服传统元件组合模型不能描述岩石蠕变过程中非线性特征的缺陷，首先根据加速蠕变阶段的应变和应变率随蠕变时间急剧增大的特点，建立黏塑性应变与蠕变时间的指数函数关系并提出非线性黏塑性体．将该非线性黏塑性体与广义Burgers蠕变模型串联，建立可以描述岩石全蠕变过程的非线性黏弹塑性蠕变模型，根据叠加原理得到一维应力状态下的轴向蠕变方程．然后基于塑性力学理论指出岩石三维蠕变本构方程建立过程中的不足之处，并给出非线性黏弹塑性蠕变模型合理的三维蠕变方程．最后采用不同应力水平下砂岩轴向蠕变试验对模型合理性进行验证，结果表明：拟合曲线与试验曲线吻合度较高，所建蠕变模型能够很好地描述砂岩在不同应力水平下的蠕变变形规律，尤其对加速蠕变阶段的非线性特征描述效果很好，验证了模型的合理性．     

A survey of surface tension,molar volume and density for Sn–Ag–Cu–Bi–Sb quinary alloys as lead-free solders

ABSTRACT

By applying the geometric models and the theoretical equation, the surface tension, the molar volume and the density were studied. The empirical calculations were carried out in temperature range 623?K?≤?T?≤?1123?K. Only few thermophysical properties were estimated for eight quinary alloys: Sn3.55Ag0.5Cu3Bi3Sb, Sn3.48Ag0.5Cu3Bi5Sb, Sn3.48 Ag0.5Cu5Bi3Sb, Sn3.40 Ag0.5Cu5Bi5Sb, Sn3.53Ag1Cu3Bi3Sb, Sn3.46Ag1Cu3Bi5Sb, Sn3.46Ag1Cu5Bi3Sb, Sn3.38Ag1Cu5Bi5Sb. The results show that surface tension and density have a linear appearance for all temperatures. We have also studied the influence of the composition and temperature in the studied alloys. The obtained theoretical results are compared with the experimental ones and with the conventional Pb–Sn welds.     

Identifying the viscoelastic properties of soft matter from the indentation response of a hard film-soft substrate system

The indentation technique is widely used in measuring the mechanical properties of soft matter at the microscale or nanoscale,but still faces challenges by these unique properties as well as the consequent strong surface adhesion, including the strong nonlinear effect, unclear judgment of the contact point, difficulties in estimating the contact area, and the risk of the indenter piercing the sample. Here we propose a two-step method to solve these problems: lay a hard film on a soft matter, and obtain the viscoelastic properties of this soft matter through the indentation response of this composite structure. We first establish a theoretical indentation model of the hard film-soft substrate system based on the theory of plates, elastic-viscoelastic correspondence principle and Boltzmann superposition principle. To verify the correctness of this method, we measure the mechanical properties of the methyl vinyl silicone rubber(MVSR) covered by a Cu nanofilm. Finally, we test the effectiveness and error sensitivity of this method with the finite element method(FEM). The results show that our method can accurately measure the mechanical properties of soft matter, while effectively circumventing the problems of the traditional indentation technique.     

干式变压器有限元仿真模型的电磁和振动分析

随着电力需求的逐年增长,干式变压器的数量也在不断增加。干式变压器在运行时存在着振动和噪声的问题,为了对干式变压器振动的规律与特点进行研究,本文建立了干式变压器本体振动的有限元仿真模型,通过电磁分析获得相应的磁场分布,然后利用结构动力学分析得到其本体振动的相关规律。通过对处于运行状态的变压器振动数据进行实测分析,得到变压器振动的特征频率,然后对仿真结果进行对比分析,可以发现振动幅度与频率之间存在的关系。本文的研究结果可对干式变压器的减振降噪研究提供参考。     

Effect of additive length and chemistry on the morphology of blends of conjugated thiophenes and fullerene derivative acceptor molecules

Small molecule additives have been shown to increase the device efficiency of conjugated polymer (donor) and fullerene derivative (acceptor) based organic solar cells by modifying the morphology of the device active layer. In this paper we conduct a systematic study of how additives affect the donor‐acceptor morphology using molecular dynamics simulations of blends of thiophene‐based oligomers, mimicking poly(3‐dodecylthiophene) (P3DDT) or poly(2,2′:5′,2”‐3,3”‐didocyl‐terthiophene) (PTTT), and fullerene derivatives with additives of varying length and chemical functionalization, mimicking experimentally used additives like methyl ester additives, diiodooctane, and alkanedithiols. We find that functionalization of additives with end groups that are attracted to acceptor molecules are necessary to induce increased donor‐acceptor macrophase separation. In blends where acceptors intercalate between oligomer alkyl side chains, functionalized additives decrease acceptor intercalation. Functionalized additives with shorter alkyl segments increase acceptor macrophase separation more than additives with same chemical functionalization but longer alkyl segments. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1046–1057     

The Szegö kernel on a class of non-compact CR manifolds of high codimension

We generalize Nagel’s formula for the Szegö kernel and use it to compute the Szegö kernel on a class of non-compact CR manifolds whose tangent space decomposes into one complex direction and several totally real directions. We also discuss the control metric on these manifolds and relate it to the size of the Szegö kernel.     

Salen–Mg-doped NH2–MIL-101(Cr) for effective CO2 adsorption under ambient conditions

A novel metal-doped metal–organic framework (MOF) was developed by incorporating salen–Mg into NH₂–MIL-101(Cr) structure under ambient conditions. The Schiff base complex was successfully prepared by condensing salicylaldehyde with a free amino group and then coordinating metal ions. Such a structure can endow the sample with higher CO₂ adsorption performance. At 0°C and 1 bar, the salen–Mg-modified sample achieves the maximum adsorption capacity of 2.18 mmol g⁻¹ for CO₂, which was 5.8% higher than the pristine salen–MOF under the same conditions. Notably, the Freundlich model indicates that the CO₂ adsorption process of all samples conforms to reversible adsorption. However, the correlation coefficients (R²) of the Mg-doped sample are lower than that of the pristine sample. Besides, the CO₂/N₂ adsorption selectivity and isosteric heat also show a similar trend. These results indicate that the salen–Mg can enhance the interaction between the material and CO₂ molecules.     

Dissolution optimization and kinetics of nickel and cobalt from iron-rich laterite ore,using sulfuric acid at atmospheric pressure

More than 70% of the world's nickel reserves are found in laterite ores. In this research, a laterite ore sample, containing Ni, Co, and Fe, was employed to study the recovery of nickel and cobalt. Thus, the effect of calcination, acid concentration, percent solids, and stirring rate on nickel and cobalt recoveries from an iron-rich laterite sample was investigated. Optimization with response surface methodology and kinetic studies were performed. The calcination of the sample prior to leaching at 500°C for 2 h provided condition for better nickel and cobalt dissolutions. At optimal conditions, the concentration of sulfuric acid, solid-to-liquid ratio, stirring speed, temperature, and time test were equal to 5 M, 0.1, 370 rpm, 90°C, and 2 h, respectively. The highest recoveries of nickel and cobalt were 65.9% and 63.1%, respectively. Solids content had a negative effect on Ni and Co recovery, whereas acid concentration was positively affected. Addition of 10% (w/v) NaCl in the presence of 5 M acid concentration, 60°C, 370 rpm, and leaching time of 2 h increased the nickel and cobalt recoveries, 15.3% and 21.4%, respectively. The high dependence of process on temperature indicates chemical control; the activation energies E_a = 59.54 and E_a = 45.74 kJ/mol, respectively, for nickel and cobalt, were also consistent with this conclusion.     

A detailed chemical kinetic model for the supercritical water oxidation of methylamine: The importance of imine formation

A detailed chemical kinetic model has been developed for supercritical water oxidation (SCWO) of methylamine, CH₃NH₂, providing insight into the intermediates and final products formed in this process as well as the dominant reaction pathways. The model was adapted from previous mechanisms, with a revision of the peroxyl radical chemistry to include imine formation, which has recently been identified as the dominant gas-phase pathway in amine oxidation. The developed model can reproduce previous experimental data on methylamine consumption and major product formation to reasonable accuracy, although with deficiencies in describing the induction time. Our simulations indicate that oxidation of the ^•CH₂NH₂ radical to methanimine, CH₂NH, is the major channel in methylamine SCWO, with subsequent hydrolysis of CH₂NH providing the experimentally observed reaction products ammonia and formaldehyde. Integral-averaged reaction rates were used to identify major reaction pathways, and a first-order sensitivity analysis indicated that the concentration of CH₃NH₂ is most sensitive to OH radical kinetics. Overall, this work clarifies the importance of imine chemistry in the oxidation of nitrogen-containing compounds and indicates that they are necessary to model these compounds in SCWO processes.